How to fix auto firing vape

MOD auto-firing is an abrupt and hazardous case for a vaper. Since a vaporizer generates heat and contains vape juice, the occurrence is dangerous for anyone if happens suddenly. Moreover, the incident can be hesitated for the victim to figure out the actual reason behind it. A vaper can rarely presume the forthcoming peril. However, a user should understand the possible indications and be alert to avoid a risky vaping device. In this post, we will talk about some common reasons for this incident and how to eliminate the possible risks. Let’s explore the rest.

Table of Contents Show

Common Causes For Device Auto-Firing
Tips To Make Your Vape Stop Firing On Its Own
How To Know If Your Vape Is Broken
What Vape Is Most Reliable?

How does the auto-firing happen?

Since vaping devices have become small in size, people are used to carrying them in their pockets. Before inhaling the vape, a user needs to press the power button to produce heat for vaping. But, sometimes this simple process goes wrong. A vape pen or MOD you are carrying in your pocket accidentally gets switched on which we call auto firing. It may happen with or without pressing the power button accidentally.

Is auto-firing dangerous?

Auto firing is a rare case, but it is not less dangerous. A vaporizer is actually a machine that needs to be operated correctly. It should work according to your command. But, the incident occurs when it turns on without a systematic command. A vaporizer consists of a heating chamber and battery that prone to be explosive. Besides, the tank contains e-juices that tend to be flaming. In both cases, auto-firing can be highly injurious to a vaper, even it can get worse in case of an explosion. This is the reason a vaper should not ignore any oddity in the vaping device.

Common reasons for auto firing

Auto firing can happen anytime and anywhere without a prior signal. However, these three things were common behind the past cases according to users and manufacturers.

*Tank leakage

Tank leakage was the primary detection in the previous case. The e-juice tank had a leakage somehow and the e-juice passed through the atomizer abnormally, and it went wrong. Tank leakage is a critical fault that can lead it to flame the device in your pocket.

*Poor battery

Vapers pay less attention when purchasing a battery for vaping devices. But, this can lead you to fall in danger. When the battery appears to be dead, you should replace it immediately. A common vice of many vapers is to purchase a fake or clone battery because of their cheap rate. But, they are not much reliable and contain cheap material that occurs the explosion.

*Manufacturing fault

A good vaporizer requires high-quality manufacturing materials to make it safe and long-lasting. Unfortunately, many users prefer a cheap device that is below quality. These devices usually have issues such as button damage and burned chips. Manufacturing fault is not only responsible for poor performance, but also they are prone to explode frequently.

How to avoid auto firing

Auto firing can be dodged in most cases by simply following a few steps. Here are some tips to follow.

– Buy a high-quality device from a trusted brand.

– Replace the dying battery as fast as possible.

– Go to an expert if you notice tank leakage.

Unfortunately, putting your trust in a damaged vaping device is a risky practice even after a repair. If the device holds a warranty from the manufacturer, go to their servicing center for a better endeavor. On the other hand, a vaper should not be comfortable with a risky vape pen or MOD, since the occurrence happens suddenly. You can better replace the device for avoiding possible perils.

r/electronic_cigarette

This page may contain sensitive or adult content that's not for everyone. To view it, confirm your age.

Download the app to use

Anonymous Browsing

r/electronic_cigarette

This page may contain sensitive or adult content that's not for everyone. To view it, confirm your age.

Download the app to use

Anonymous Browsing

Auto-firing is when a vaping device acts like you are pressing the power button when you aren’t. You don’t have to be touching the vaping device for auto-firing to occur, and it may happen randomly or continue post-release of the button.

Vapes usually auto-fire on their own due to a faulty battery. But other common reasons for auto-firing are that you have a fried chip or switch or a leaking tank.

Auto-firing usually occurs inside a person’s pocket, purse, or drawer. The vape firing on its own can be dangerous and potentially cause an explosion.

Auto-firing has happened to many vapers, but it’s essential to immediately get your device fixed post-breakage because the mod or pen could become explosive and harm the user.

Common Causes For Device Auto-Firing

Tank leakage can lead to auto-firing. The tank can leak and auto-fire when the e-juice transfers to the atomizer incorrectly.

A manufacturing fault could also cause a bad battery and lead to auto-firing. To best prevent this occurrence, you should make a point to let the device rest between hits to give the power source time to cool. However, if you suspect the battery is faulty, replace it as soon as possible.

Furthermore, avoid buying a fake or clone battery for a better price. Counterfeit or poorly made batteries are often the root cause of explosions, putting the user at risk.

Other manufacturing defects are another possible cause of your device’s auto-firing. An example of a typical manufacturing fault is a broken or wrong button insert or burned chip on the device due to cheap manufacturing materials or poor quality oversight. Again, cheap materials cause these problems and can lead to the device catching on fire or causing an explosion.

Tips To Make Your Vape Stop Firing On Its Own

First and foremost, be careful troubleshooting your device. There is electricity and heated batteries involved, and you have to mend your device with caution. If you are a beginner smoker, you should ask a professional for help before trying repairs on your own.

One of the most critical tips when working on your mod or pen is to disable the electrical circuit. Therefore, remove the batteries and tank before you do anything else.

If your device is auto-firing, the first thing you should try to fix it is to replace the battery.

If this is not the issue, you should check the chip and switch since they are commonly known to burn out. To examine them, you have to dismantle your device.

However, be sure to check the device’s warranty before you take it apart. Disassembly may void your warranty.

Burnout signs on your switch and chip can be challenging to locate, so it might be safer to replace them regardless of how they look instead of trying to guess.

In most cases, you can avoid auto-firing by researching high-quality devices and purchasing from a trusted brand, asking for professional help if the tank is leaking, and replacing the faulty battery or chip as soon as possible.

How To Know If Your Vape Is Broken

Whenever your vape heats up without you pressing the power button, technically, it is broken. The possible causes are because the button needs repair, something is wrong with your batteries, or the tank or nicotine pod is leaking.

Also, if your devices are burning out the e-juice on their own, this may point to a more severe issue.

When you feel the heat in your pocket, you will know it’s time to take out the tank and mend the pen to keep it from auto-firing. These problems can regularly happen if you are a chain vaper.

What Vape Is Most Reliable?

To avoid auto-firing, you should only purchase a high-quality device. Not only will these products work better, but they’ll also give you a smoother vaping experience. Here are the most reliable manufacturers:

Wismec

Wismec contains a reliable 18650 battery and has a 230W function.

SMOK

SMOK is one of the most popular devices and is known for its innovative design. SMOK vapes that people love include the Mag and G-Priv with Baby Beast tanks. They have a dual 18650 battery and 225W capability.

Vaporesso

Vaporesso has impeccable customer service who can help you repair any issues with the mod and is well-known in the vaping community for its wide variety of products.

UWELL

UWELL strives to become the most valuable pen company in the world. They stick to set core values and are always looking to better their product.

Halo

Halo is one of the most consistent vaping companies because they have been around since the beginning of the trend. They even have a product for beginners called The Reactor, a starter kit.

Yet, no matter what brand you go with, just remember that after purchasing a new product, you should check it to see if it is heating up without you using it.

Conclusion

If you feel any heat in your pocket, your vape is most likely auto-firing. When this occurs, either replace the mod immediately or correct the issue to avoid an explosion. A poor battery, tank leakage, or cheap manufacturers are common reasons for auto-firing and can often lead to additional product defects, injuries, and bodily harm.