Jika Anda mencoba mengakses server basis data Anda dari jarak jauh dan mendapatkan kesalahan di bawah saat login MySQL
Kesalahan
“KESALAHAN 1130 (HY000). Tuan rumah '10. 120. 152. 137’ tidak diizinkan untuk terhubung ke server MySQL ini”
Maka artikel ini akan membantu Anda untuk mengatasi masalah ini. Pada artikel ini saya akan menunjukkan cara memperbaiki kesalahan ini
Sebagian besar kesalahan ini terjadi ketika pengguna root Anda hanya ditambahkan dengan akses localhost. Anda dapat memeriksa menggunakan perintah di bawah ini, pertama-tama buka server database mysql Anda dan ketik perintah di bawah ini untuk memeriksa
mysql> SELECT host FROM mysql.user WHERE User = 'root'; +-----------+ | host | +-----------+ | 127.0.0.1 | | ::1 | | localhost | +-----------+ 3 rows in set (0.00 sec)Seperti yang Anda lihat, root hanya diperbolehkan dari localhost 127. 0. 0. 1. Anda tidak dapat terhubung dari sumber eksternal. Jika Anda melihat alamat IP lain
Selanjutnya Anda perlu menambahkan alamat IP dari setiap sistem yang ingin Anda beri akses, lalu berikan hak istimewa seperti di bawah ini
Saya baru saja menginstal XAMPP. Ketika saya pertama kali membuka phpMyAdmin berfungsi dengan baik. Sejak itu saya membuat beberapa pengguna, tetapi ketika saya me-restart apache dan MySQL saya mendapat pesan kesalahan di bawah ini ketika mencoba mengakses phpMyAdmin
Ini file my.ini_ saya
# Example MySQL config file for small systems. # # This is for a system with little memory (<= 64M) where MySQL is only used # from time to time and it's important that the mysqld daemon # doesn't use much resources. # # You can copy this file to # C:/xampp/mysql/bin/my.cnf to set global options, # mysql-data-dir/my.cnf to set server-specific options (in this # installation this directory is C:/xampp/mysql/data) or # ~/.my.cnf to set user-specific options. # # In this file, you can use all long options that a program supports. # If you want to know which options a program supports, run the program # with the "--help" option. # The following options will be passed to all MySQL clients [client] #password = port = 3306 socket = "C:/xampp/mysql/mysql.sock" # Here follows entries for some specific programs # The MySQL server [mysqld] port= 3306 socket = "C:/xampp/mysql/mysql.sock" basedir = "C:/xampp/mysql" tmpdir = "C:/xampp/tmp" datadir = "C:/xampp/mysql/data" pid_file = "mysql.pid" # enable-named-pipe key_buffer = 16M max_allowed_packet = 1M sort_buffer_size = 512K net_buffer_length = 8K read_buffer_size = 256K read_rnd_buffer_size = 512K myisam_sort_buffer_size = 8M log_error = "mysql_error.log" # Change here for bind listening # bind-address="127.0.0.1" # bind-address = ::1 # for ipv6 # Where do all the plugins live plugin_dir = "C:/xampp/mysql/lib/plugin/" # Don't listen on a TCP/IP port at all. This can be a security enhancement, # if all processes that need to connect to mysqld run on the same host. # All interaction with mysqld must be made via Unix sockets or named pipes. # Note that using this option without enabling named pipes on Windows # (via the "enable-named-pipe" option) will render mysqld useless! # # commented in by lampp security #skip-networking #skip-federated # Replication Master Server (default) # binary logging is required for replication # log-bin deactivated by default since XAMPP 1.4.11 #log-bin=mysql-bin # required unique id between 1 and 2^32 - 1 # defaults to 1 if master-host is not set # but will not function as a master if omitted server-id = 1 # Replication Slave (comment out master section to use this) # # To configure this host as a replication slave, you can choose between # two methods : # # 1) Use the CHANGE MASTER TO command (fully described in our manual) - # the syntax is: # # CHANGE MASTER TO MASTER_HOST=, MASTER_PORT=, # MASTER_USER=, MASTER_PASSWORD= ; # # where you replace , , by quoted strings and # by the master's port number (3306 by default). # # Example: # # CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306, # MASTER_USER='joe', MASTER_PASSWORD='secret'; # # OR # # 2) Set the variables below. However, in case you choose this method, then # start replication for the first time (even unsuccessfully, for example # if you mistyped the password in master-password and the slave fails to # connect), the slave will create a master.info file, and any later # change in this file to the variables' values below will be ignored and # overridden by the content of the master.info file, unless you shutdown # the slave server, delete master.info and restart the slaver server. # For that reason, you may want to leave the lines below untouched # (commented) and instead use CHANGE MASTER TO (see above) # # required unique id between 2 and 2^32 - 1 # (and different from the master) # defaults to 2 if master-host is set # but will not function as a slave if omitted #server-id = 2 # # The replication master for this slave - required #master-host = # # The username the slave will use for authentication when connecting # to the master - required #master-user = # # The password the slave will authenticate with when connecting to # the master - required #master-password = # # The port the master is listening on. # optional - defaults to 3306 #master-port = # # binary logging - not required for slaves, but recommended #log-bin=mysql-bin # Point the following paths to different dedicated disks #tmpdir = "C:/xampp/tmp" #log-update = /path-to-dedicated-directory/hostname # Uncomment the following if you are using BDB tables #bdb_cache_size = 4M #bdb_max_lock = 10000 # Comment the following if you are using InnoDB tables #skip-innodb innodb_data_home_dir = "C:/xampp/mysql/data" innodb_data_file_path = ibdata1:10M:autoextend innodb_log_group_home_dir = "C:/xampp/mysql/data" #innodb_log_arch_dir = "C:/xampp/mysql/data" ## You can set .._buffer_pool_size up to 50 - 80 % ## of RAM but beware of setting memory usage too high innodb_buffer_pool_size = 16M ## Set .._log_file_size to 25 % of buffer pool size innodb_log_file_size = 5M innodb_log_buffer_size = 8M innodb_flush_log_at_trx_commit = 1 innodb_lock_wait_timeout = 50 ## UTF 8 Settings #init-connect=\'SET NAMES utf8\' #collation_server=utf8_unicode_ci #character_set_server=utf8 #skip-character-set-client-handshake #character_sets-dir="C:/xampp/mysql/share/charsets" sql_mode=NO_ZERO_IN_DATE,NO_ZERO_DATE,NO_ENGINE_SUBSTITUTION [mysqldump] quick max_allowed_packet = 16M [mysql] no-auto-rehash # Remove the next comment character if you are not familiar with SQL #safe-updates [isamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M [myisamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M [mysqlhotcopy] interactive-timeout _